DDC1000 series vdc vdc % typ. ma typ. ddc1021 3.3 75 ddc1022 5 79 ddc1023 12 82 ddc1024 15 82 ddc1025 5 78 ddc1026 12 81 ddc1027 15 81 ddc1031 3.3 76 ddc1032 5 80 ddc1033 12 83 ddc1034 15 83 ddc1035 5 79 ddc1036 12 82 ddc1037 15 82 ddc1041 3.3 76 ddc1042 5 80 ddc1043 12 83 ddc1044 15 83 ddc1045 5 79 ddc1046 12 82 ddc1047 15 82 pin singles duals 1 -vin -vin 2 -vin -vin 3ncnc 10 nc common 11 nc nc 12 nc -vout 13 +vout +vout 14 nc nc 15 -vout common 22 nc nc 23 +vin +vin 24 +vin +vin tolerance millimeters inches x.x0.2 5 x.xx0.01 x.xx0.1 3 x.xxx0.00 5 pin 0.05 0.002 2463 208th street, ste. 205 http://www.mpsind.com torrance, ca 90501 e-mail: sales@mpsind.com key features selection guide model number input voltage output voltage efficiency reflected ripple current output current 700 600 250 100 700 250 125 200 300 tel: (310) 533-1455 fax: (310) 533-1853 weight ? non-conductive black plastic case material ? 600 ma mps industries DDC1000 3w dc/dc's are in "gull-wing" smt package and meet 245oc/10sec in solder-reflow for lead free process. the series consists of 21 models that operate over input voltage ranges of 9- 18vdc, 18-36vdc and 36-75vdc which provide precisely regulated output voltages of 3.3v, 5v, 12v, 15v, 5v, 12v and 15vdc. the -40c to +71c operating temperature range makes it ideal for data communication equipment, mobile battery driven equipment, distributed power systems, telecommunication equipment, mixed analog/digital subsystems, process/machine control equipment, computer peripheral systems, and industrial robot systems. the modules have a maximum power rating of 3w and a typical full-load efficiency of 83%, continuous short circuit, 50mv output ripple, built-in filtering for both input and output minimize the need for external filtering. case size ? pin connections mechanical dimensions 8.8g (0.31oz) 12 (9 ? 18) 24 (18 ? 36) 300 3w, wide input range smd, single & dual output dc/dc converters 32.3x14.8x10.2mm (1.27x0.58x0.40inch) 125 100 700 600 25 15 10 nc: no connection ? efficiency up to 83% ? 1500vdc isolation ? mtbf > 1,000,000 hours ? 2:1 wide input range ? ul1950 safety approval ? short circuit protection ? temperature performance -40c to +71c ? industry standard pinout ? ul 94v-0 package material ? internal smd construction 250 200 300 125 100 48 (36 ? 75) 200 1 4 . 8 [ 0 . 5 8 ] 1 6 . 1 [ 0 . 6 3 ] 1 8 . 8 [ 0 . 7 4 ] 1 0 . 2 [ 0 . 4 0 ] 32.3 [1.27] 0 . 5 [ 0 . 0 2 ] 2.2 [0.09] 123 12 11 10 14 15 13 24 23 22 top side 17.82 [0.702] 2.54 [0.100] 0.5 [0.020] 0.15
DDC1000 series min. max. units parameter min. typ. max. units 12vdc input models -0.7 25 vdc isolation voltage 1500 --- --- vdc 24vdc input models -0.7 50 vdc isolation resistance 1000 --- --- m ? 48vdc input models -0.7 100 vdc isolation capacitance --- 65 100 pf --- 260 c switching frequency --- 300 --- khz --- 2500 mw parameter conditions min. max. units parameter min. typ. max. units operating temperature ambient -40 71 c line regulation --- 0.1 0.3 % operating temperature case -40 90 c load regulation --- 0.3 1.0 % storage temperature -40 125 c ripple & noise --- 50 75 mv p-p humidity --- 95 % short circuit cooling units uf 2463 208th street, ste. 205 http://www.mpsind.com torrance, ca 90501 e-mail: sales@mpsind.com --- mhrs 4700 180 1 maximum capacitive load mil-hdbk-217f @25c ground benign conditions vin = min. to max. input surge voltage (1000ms) lead temperature (1.5mm from case for 10sec.) 100khz, 1v 60 seconds 500vdc free-air convection output characteristics continuous 3w, wide input range smd, single & dual output dc/dc converters absolute maximum ratings parameter conditions io = 10% to 100% --- general characteristics internal power dissipation 20mhz bw exceeding the unit absolute maximum ratings could cause damage. these are not continuous operating ratings. environmental characteristics mtbf tel: (310) 533-1455 fax: (310) 533-1853 models by output voltage (each output on duals) notes: 1. specifications typical at ta=+25c, resistive load, nominal input voltage, rated output current unless otherwise noted. 2. transient recovery time is measured to within 1% error band for a load step change of 75% to 100%. 3. these power converters require a minimum output load to maintain specified regulation. 4. operation under no-load conditions will not damage these modules; however, they may not meet all specifications listed. 5. all dc/dc converters should be externally fused at the front end for protection. 6. other input and output voltage may be available, please contact factory. 7. all specifications subject to change without notice. 8. for detailed data sheet, please contact mps directly. singles duals derating curve ?? ] ambient temperature output power (%) 0 20 40 60 80 100 -40 50 60 80 100 110 90 70 400lfm 200lfm 100lfm natural convection
|
